John Deere Gator XUV Pro 66 Snow Plow Kit, Plow Blade Pushtubes & Plow Mount
John Deere Gator XUV Pro 66 Snow Plow Kit, Plow Blade Pushtubes & Plow Mount. The Snow Blade Plow Color is Black. Snow doesn’t stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy-duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center-mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come. Please Note: All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake. UTV Snow Plow Blade – County / DOT Style. One (1) Reversible Wearbar. Rubber Flap Stabilizer Bar. Installation Hardware and Instructions. County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel. Impact Resistant Reinforcement System includes a leading edge stiffener and vertical stabilizer bar. Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability. High strength, high yield 3/16 thick Grade 50 steel wear bar. Angled Blade: 16 on the low side; 23 on the high side. Rubber flap & stabilizer bar with a rubber flap. Height AND angle adjustable steel skid feet. Designed in the USA. Impact Resistant Reinforced Pivot Assembly – 2 additional support bars for maximum durability & strength. The turn system allows for easy positioning of the blade in 5 different angles – 0, 12.5°, 25°. Simple detachment system with the pull of a pin. Structural tube steel cross bar for added lateral rigidity. 13.5 inches center to center for plow mount tabs. Extended Push Tubes are designed to be used with SxS/UTVs that have tracks. Below are some Snow Plow Parts & Accessories that you can add to your order. Optional Pushtube Lift Kits. Pushtube Lift Kits allow plow installation on machines with skid plates, 13″-15″ and 15″-17″ off the ground. Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes). PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System. Change the blade angle while driving; full radius turn in just 10 seconds. Heavy duty chrome plated ¾? No modifications necessary – bolts directly to the Denali UTV Plow Push Tubes. Wire harness utilizes weatherproof connectors. Optional Plow Pulley Fairlead Features. Replaces the winch fairlead during the plowing season. For use with Steel AND Synthetic cables. Curved cable groove helps eliminate the flattening and breaking of the cable. Wide Spool: 3 x 6.67? Clevis hook and nylon strap. Allows greater precision when raising/lowering plow blade and increases the angle of pull. Single braid, Dyneema rope with galvanized steel thimble/eyelet.